How to solve the problem that the fiber laser marking machine does not emit light?
1,Check whether the laser is faulty The fiber laser marking machine may not emit laser because of laser failure. First, you need to check the connection of the laser, confirm whether the power cord interface is correct, and whether the power switch is turned on. If everything is normal, you can open the marking machine casing to check whether the laser is working normally. If the laser fails, you need to replace the laser.
2,Check whether the light path is blocked The lenses and reflectors in the optical path of the stainless steel laser marking machine are easily contaminated by dust, oil, etc., causing the optical path to be blocked and the laser output to be abnormal. You need to open the marking machine casing and check the cleanliness of the lenses and reflectors in the optical path. If there are stains, you need to clean them in time.
3,Check whether other components are faulty If the laser and optical path are normal, you can check whether other components are faulty. There may be problems such as loose power cords and control board failures, which need to be checked and eliminated one by one.
4,Check if the software settings are correct The laser marking machine models are different, but if the software settings are incorrect, the laser will not work. You need to check whether the correct laser type, laser power and other parameters are selected in the software settings. You can try to reset the software parameters and restart the marking machine.
Fiber laser engraving machine equipment can produce exquisite patterns, texts, and LOGOs on metal materials such as stainless steel, iron plates, aluminum and aluminum alloys.